Faq

FAQS

How do I clean and care for my stainless steel surfaces?

Some suggestions for cleaning and caring for stainless steel surfaces: -Use stainless steel cleaner and polish. Visit our accessory shop for WPro products -Use liquid detergent or all-purpose cleaner. Rinse with clean water and dry with soft, lint-free cloth. -Use vinegar for hard water spots Do not use soap-filled scouring pads, abrasive cleaners, cooktop Polishing Cream, steel-wool pads, gritty wash cloths. or some paper towels. Damage can occur.

For a Whirlpool gas hob of less than 7500W power the minimum distance is 65cm. For hobs over 7500W the minimum distance is 75cm. Electric hobs should be 65cm apart.

Pans need to be made of a ferrous metal. You can tell if your pans are suitable by using a fridge magnet. If it sticks to the base, its OK for induction hobs.

In case of a prolonged power failure, surface burners can be lit manually. Hold a lit match near a burner and turn the control knob to the high position.
The rim is made of stainless steel to prevent rusting. Changes in colour due to the high temperatures of the hot plate are quite normal

They are best cleaned with chrome cleaner (Solvol Autosol). Care should be taken not to block the burner holes and grooves.

Yes, conversion kits for LPG are available for all Whirlpool hobs. These may be obtained from Customer Service.